|
|
 |
|
|
Product details |
|
Sewer
3"-48"
Standard and Heavy Wall
SDR 35/26
Solvent weld, gasketed
View catalog (pdf, 1.7MB)
Specified Fittings is the west coast stocking representative for Vassallo Industries.
SHORT FORM SPECIFICATION
Fittings for SDR35 Sewer
All fittings for SDR35/F679 pipe for ½" through 48" shall be one-piece injection molded or fabricated from a PVC compound meeting ASTM D1784. Gasket-end fittings are option of user. Gasket bells shall conform to ASTM D3212 and ASTM F477. Fittings shall also conform to ASTM F913 and ASTM F1336.
Gaskets shall be locked-in style.
Fittings for Heavy Wall Sewer
All fittings for SDR26/35/F679 heavy wall pipe shall be one-piece injection molded or fabricated and conform to the requirements of ASTM D3034 with a minimum wall thickness of SDR26 as defined in Section 7.4.1. Solvent weld- or gasket-end fittings are option of user. Solvent weld bells shall be as defined in ASTM D3034/F679. Gasket bells shall conform to ASTM D3212 and ASTM F477. Fittings shall also conform to ASTM F913 and ASTM F1336.
Gaskets shall be locked-in style.
Manhole Adapters for Sewer ASTM D3034, SDR35, F679, PVC Sewer Pipe
All manhole adapters for SDR35/F679 pipe shall be one-piece injection molded or fabricated from a PVC compound meeting ASTM D1784. Solvent weld- or gasket-end fittings are option of user. Solvent weld bells shall be as defined in ASTM D3034/F679. Gasket bells shall conform to ASTM D3212 and ASTM F477. Fittings shall also conform to ASTM F913 and ASTM F1336.
Gaskets shall be locked-in style.
Gaskets may be made with a variety of different compounds, depending upon the application.
Composition of the standard gasket is SBR but we also offer EPDM, nitrile, Neoprene and Viton.
Special heavy-duty aggregate is specifically formulated to be compatible with Pacific Northwest concrete mixtures. This specially tested formulation provides the best resistance to shipping and handling abrasions while providing superior bonding between the manhole and the adapter.
About our locked-in gaskets
Specified Fittings' locked-in gasket is quickly and easily joined together by simply inserting the spigot end of the pipe into the bell socket of the fitting. Multi-lip design of the sealing gasket provides a positive seal that is pressure and vacuum tight. Retained ring design prevents fishmouthing or dislocation of the gasket. Sealing gasket is exceptionally smooth and completely free of core marks. Selection of the correct material to be applied to a sealing system will depend not only on the characteristics of the fluid to be contained but also the properties of the surrounding environment.
|
|
